New to smallblocks...
Thread Starter
|
Elder User
Joined: Dec 2003
Posts: 534
Likes: 0
From: Hoquiam, WA
New to smallblocks...
I did a search and didn't come up with a lot.
I am looking to do a moderate build that will give me the most amount of torque.
The engine that I am getting is a 302 that is in a 75 F100 4x4.
I need to check on some casting numbers, because it's not the original engine.
Right now I'm kind of steering towards:
Performer intake
Crane 901 or 931
Holley 600 Vac sec
Any other ideas?
The engine will be in front of a C4 and Tcase, so I know I'm going to lose some power there.
BTW-this is going into an 84 Cherokee (the small one).
I am looking to do a moderate build that will give me the most amount of torque.
The engine that I am getting is a 302 that is in a 75 F100 4x4.
I need to check on some casting numbers, because it's not the original engine.
Right now I'm kind of steering towards:
Performer intake
Crane 901 or 931
Holley 600 Vac sec
Any other ideas?
The engine will be in front of a C4 and Tcase, so I know I'm going to lose some power there.
BTW-this is going into an 84 Cherokee (the small one).
