Scanner Port

Reply Subscribe

Thread Tools

Search this Thread

Mar 18, 2004 | 08:53 PM

grhodes18

Thread Starter

New User

Joined: Jan 2004

Posts: 3

Likes: 0

Scanner Port

I can't seem to fine the scanner prot on my 94 Ford E-150 van. I assume that it is under the hood. All I can fine is a spare EEC cover attached to a harness wire on the right side of the engine compartment by the battery. I hope someone can tell me where to look. Thank You

Mar 18, 2004 | 09:07 PM

dliguori

Junior User

Joined: Jan 2004

Posts: 50

Likes: 0

From: San Diego

I'm not sure just where it is on your vehicle but I am almost positive that it is accessed from the cab of the truck either by the steering collum or by the passenger side kick pannel. Good luck!

Mar 19, 2004 | 12:04 AM

c96drumm

Laughing Gas

Joined: Mar 2003

Posts: 877

Likes: 1

From: Colorado, U.S.A!

I know the OBD II connectors are in the cab, but all the EEC IV ones I've seen are under the hood. On my 89 302, it's over between the battery and fender on the right side. Two connectors, a red one with four sockets and a gray one with one socket. I know the 89 and 94 are quite different, but they both use EEC-IV.

Mar 19, 2004 | 01:34 AM

dliguori

Junior User

Joined: Jan 2004

Posts: 50

Likes: 0

From: San Diego

Oh, sorry! Didn't mean to imply that your an idiot or anything. Good luck and if I come across anything I'll let you know.

Mar 19, 2004 | 01:55 AM

c96drumm

Laughing Gas

Joined: Mar 2003

Posts: 877

Likes: 1

From: Colorado, U.S.A!

I don't think anybody inferred that you implied that they were idiots!

Yours was a fine post and may be right for that particular vehicle. I was just posting an alternate possibility. That's how things work here. Stay tuned!

Mar 19, 2004 | 03:07 PM

94van

Posting Guru

Joined: Oct 2000

Posts: 1,577

Likes: 0

From: Southern MD

My '94 E-150 plug is located next to the battery on the driver's side just under the fender. You may have to reach under the fender top and feel for it if it's not been used before.