the beast is back
Thread Starter
|
New User
Joined: Sep 2003
Posts: 24
Likes: 0
the beast is back
i got my truck back lastnight, after what i thought was clutch problems (thank you to those who replied to the slippage thread, i appreciate the input)
as it turned out, it was just in need of a tune up....
they did the plugs, wires, pcv, filters....
2 cylinders were misfiring because the wires were broken, so the spark was arcing (arking?) out on the metal...hence the lack of power.
long story short, i saved 500 yesterday...
that will cover the 31s i hope to get this summer.
(shackels too?)
thanks again to those who gave input...always appreciated.
peace,
aeon
as it turned out, it was just in need of a tune up....
they did the plugs, wires, pcv, filters....
2 cylinders were misfiring because the wires were broken, so the spark was arcing (arking?) out on the metal...hence the lack of power.
long story short, i saved 500 yesterday...
that will cover the 31s i hope to get this summer.
(shackels too?)
thanks again to those who gave input...always appreciated.
peace,
aeon
