code p1320
Thread Starter
|
Senior User
Joined: Jan 2004
Posts: 111
Likes: 0
From: TX
code p1320
hello everyone,
I'm sure everyones read my previous post on my X running rough. Well thats all taken care of, but now i have this pesky cel that when i put my scanner on it it pulls a P1320 which is Manufacturer Contrl Ignition System or Misfire. My X runs fine not a miss or hesitation since ive taken care of the other problem I had. Any ideas would be great. I do know that the ICM is built into the PCM, so if that actually bad, then that tells me that I have to replace the PCM but like I said, everything ignition wise is fine.....stumpped
I'm sure everyones read my previous post on my X running rough. Well thats all taken care of, but now i have this pesky cel that when i put my scanner on it it pulls a P1320 which is Manufacturer Contrl Ignition System or Misfire. My X runs fine not a miss or hesitation since ive taken care of the other problem I had. Any ideas would be great. I do know that the ICM is built into the PCM, so if that actually bad, then that tells me that I have to replace the PCM but like I said, everything ignition wise is fine.....stumpped
