i jus got me a v-10 out of a winnebago and go t a trabns and transfer case out of a 01 f250. what all is it gonna take to put that into my bronco.

any suggestions???

and i got it all for nothing hehehehe

 

I don't know but good luck!!

 

Alot of time and patient and a whole lot of imagination. Once one person figures it out I believe people will start doing these swaps but everyone is waiting on someone else to do it first.

 

lol wish someone had done one of thjese so i could get a bit of info
i know i gotta reinforce the frame to handle the torque
basically like i would be if dropping a 7.3 diesel in

 

All I can say is good luck bro.

 

your gonna need the complete wiring harness and computer to run the v10 for starters. other then that good luck. Take lots of pics and take your time.

 

weld in the motor mounts, splice a few wires ... sit under the hood and curse for a while, ..... hehe

 

i decided to have my local garage install it. they are only gonna charge me 500 to do it so ill have them give me plans so i can post for others to do.

 

WOW! 500.... please post pictures that sounds like a smokin deal!

 

Man, everyone is getting lucky around here. That one guy that got a free bronco and motor and other stuff mentioned. And you get a $500 V10, you are so lucky. Burn 'em up for us when she's done! -wb

 

lucky man, that is a smoking engine choice, It might be worth it for some of us to drive to this shop, wherever it is, just to put in a new motor. All I need is a powerstroke...

 

Hmmmm only a state away.

 

ohrtman19 . since you are the first to be doing something like this to a bronco, it would be great if you could just camp out at the shop and take as many pics as possible. or ask them to, just tell them that if they are successful it could make them lots of money in the future being the first shop to complete this conversion.

Just something to think about .

later

 

What are the hp and ft/lb numbers on the V10? Everyone makes it sound as if the Broncos have some week frames on here, 78-79 had 460 in them. Are 1980 and newer frames tht weak? Just asking.

 

78-79 never came factory with 460s. The biggest they came with is the 400. People have swaped in 460 on 78-79s and 80 and above. Personally, I havent found a weak spot on 80-86 broncos.