67/69 Project update and Pics
Thread Starter
|
Lead Driver
Joined: Apr 2001
Posts: 6,175
Likes: 21
From: Texas
67/69 Project update and Pics
recent pics of the 67/69 F250 project.
http://www.thedreyerfamily.com/69f250/projectupdate.htm
It's starting to come together. There's plenty left to do.
Let me know what you all think.
take the link at the top af that page to get back to the project in general, for those not already familiar.
http://www.thedreyerfamily.com/69f250/projectupdate.htm
It's starting to come together. There's plenty left to do.
Let me know what you all think.
take the link at the top af that page to get back to the project in general, for those not already familiar.
Guest
Posts: n/a
Bendix power steering box 69 f-250
Did you install a new steering box on your truck, have 69 truck, rebuilt psbox, top seal leaking, unable to locate that seal, do not want to trade mine in for core, your truck looks great have had mine for 8 yrs,
Thread Starter
|
Lead Driver
Joined: Apr 2001
Posts: 6,175
Likes: 21
From: Texas
TC,
My apologies, I thought had already replied.
I purchased that gauge panel and gauges from haneline.com
It cost about $405 with the Teleflex 6 gauge kit.
Im now running a Sunpro gauge, since the Teleflex temp gauge read hot all the time.
regarding the cash tank, I put in $100 one day and didn't fill it up. that hurts. to make it worse, my gauge works now, but reads low. So, it never passed 1/4 Full on the gauge. $100 and 1/4 tank. ouch.
My apologies, I thought had already replied.
I purchased that gauge panel and gauges from haneline.com
It cost about $405 with the Teleflex 6 gauge kit.
Im now running a Sunpro gauge, since the Teleflex temp gauge read hot all the time.
regarding the cash tank, I put in $100 one day and didn't fill it up. that hurts. to make it worse, my gauge works now, but reads low. So, it never passed 1/4 Full on the gauge. $100 and 1/4 tank. ouch.
Fleet Mechanic
Joined: Aug 2001
Posts: 1,526
Likes: 0
From: Round Rock, TX
That's gotta be disappointing about the Teleflex guage not working properly. Are you going to try and exchange it? Maybe putting a resistor inline with the wiring for it would help bring it to a more suitable range.
