efi to carb

Reply Subscribe

Thread Tools

Search this Thread

Feb 13, 2004 | 12:24 AM

bigwhtbco

Thread Starter

Senior User

Joined: Dec 2003

Posts: 268

Likes: 0

From: NY

efi to carb

ok guys check this out. i'm putting a 460 in my 89 bronco that had a 5.0 efi. i know i'm going to have to do some creative wiring. i dont really care if that tach works or any of the gauges, i'm putting in all autometers. but the ignition is my real concern. any tips? as in what wires do what. i know i'll be able to figure it out, but if anyone has a good idea of whats goin on. it would be cool to get a heads up

. thanks guys

Feb 13, 2004 | 08:46 AM

Ken S

Junior User

Joined: Jun 2003

Posts: 77

Likes: 1

From: Leb. jct. Ky.

I have a 86 E150 with a EEC and EFI and all the crap that goes with it. I'm going to get a wiring harness out of a older E or F seires truck and use that. I'm not too thrilled about a dura spark ignition,,, but I would much rather have that than the EEC! I have had about enough of thoes $40.00 TFI ignition modules. This EEC going down!! Have fun! And good luck!

Feb 13, 2004 | 10:55 PM

stuperscout

Junior User

Joined: Jun 2003

Posts: 51

Likes: 0

I just finished a 300 efi to a 460 carb swap on my 88 f250 lots of wiring to start with but when i finished I only had about 6 wires left and just about every thing works (No check engine light)