Chip Install
Thread Starter
|
New User
Joined: Apr 2002
Posts: 23
Likes: 0
From: Houston
Chip Install
I posted this over in the SCREW forum but no response, I just ordered my diablo chip for the screw, but don't have instructions to install it. I got one in my SuperDuty, but need help for the screw...anyone have details??
Senior User
Joined: Feb 2002
Posts: 402
Likes: 0
From: Two Harbors, MN
Chip Install
I take it that SCREW is supercrew... I'm not sure about those but I got instructions for the f150 when mine came... i just went to the Diablo website and it was pretty easy. It seems to me that, whatever the size, the ECM is behind the kick panel on either the drivers side or the passengers side.... outside of that just follow the SD instructions...
I just put in the chip so if you need any help... post it... it is actually a very simple install with the exception of one 10mm bolt and that isnt all that difficult
Hope I can be of some help
GOOD LUCK
slammer
I just put in the chip so if you need any help... post it... it is actually a very simple install with the exception of one 10mm bolt and that isnt all that difficult
Hope I can be of some help
GOOD LUCK
slammer
Thread
Thread Starter
Forum
Replies
Last Post
