On Board Air
Fleet Mechanic
Joined: Aug 2003
Posts: 1,773
Likes: 95
From: Phoenix, AZ
Hey Boss,
Wish I could take credit for the onboard instructions. I was looking for an on baord air install myself when I ran across that article.
Can't vouch for the compressor reliability or brand. Looks like good quality compressors are hard to find. I searched quite a bit.
Wish I could take credit for the onboard instructions. I was looking for an on baord air install myself when I ran across that article.
Can't vouch for the compressor reliability or brand. Looks like good quality compressors are hard to find. I searched quite a bit.
Thread Starter
|
Senior User
Joined: Sep 2003
Posts: 491
Likes: 0
From: Miami Beach
Just came across this link from on board air
http://onboardair.com/
I also was at northern tools today eyeballing the new little Delta compressor with tank, and got to wondering about installing a convertor and quick connects to make it removable. It's only 6" wide, 14" tall, and 20" long, and would fit nicely int he bed against one of the side. Then hardwire and plumb the onbaord stuff. At $99.00 each with tank its almost hard not to do it as I've wanted to install a phase convertor for some time now. Ideas?
http://onboardair.com/
I also was at northern tools today eyeballing the new little Delta compressor with tank, and got to wondering about installing a convertor and quick connects to make it removable. It's only 6" wide, 14" tall, and 20" long, and would fit nicely int he bed against one of the side. Then hardwire and plumb the onbaord stuff. At $99.00 each with tank its almost hard not to do it as I've wanted to install a phase convertor for some time now. Ideas?
Thread
Thread Starter
Forum
Replies
Last Post
Bossman256
Small Block V8 (221, 260, 289, 5.0/302, 5.8/351W)
1
Jun 21, 2011 11:52 AM
