Need help please, driver side mess.
Thread Starter
|
New User
Joined: Nov 2003
Posts: 9
Likes: 0
From: NY
Need help please, driver side mess.
My wheel bearing went on drivers side and its a complete mess. Everything needs replacement. The spindle, the hub and everything in it. The brakes and rotor stuck in there when the tire fell off. Can anyone tell me the spindle length on it? I believe he said there's 2 choices, 5 1/4 or something else. 1988 Eddie Bauer with 351. The junkyards want the number on that to give me the part. Manual hubs. Also, whatre all the parts I will need from that area? It's basically everything in that area including axle. Just wanna make sure I think of everything....Thanks.
Last edited by 8cyL4L; Jan 21, 2004 at 03:07 PM.
Senior User
Joined: Nov 2003
Posts: 404
Likes: 0
From: Indiana
Senior User
Joined: Nov 2003
Posts: 325
Likes: 0
From: Hallettsville, Texas
If your drivers side was in that bad of condition, you can bet your passenger side is to. Tear it down now before it is too late. Then you should be able to get all of the info you need for the bad side from the parts on your good side except part number for the spindle and axle shaft. They would be able to match it up though. Good luck.
