Throttle Body
Thread Starter
|
Senior User
Joined: Dec 2001
Posts: 145
Likes: 0
Throttle Body
Hello All, i have just got my bronco fixed, changed the AOD to a C-6 man did it help the driving, but i want more power, i would like to install a BBK 56mm Throttle body, but what is a good website to order them, also what is a good mass air flow sensor and where would i find that, i have to change the upper manifold gaskets, so while i am in the i will chnage the vavle cover gaskets too, any warnings before i start on those?? Thanks for all the help
Senior User
Joined: Dec 2003
Posts: 404
Likes: 0
From: Groton, CT
Got my BBK Twin 56MM from Summit Racing. Pro-M is the way to go for an aftermarket MAF sensor. I purchased one from Granatelli, but had nothing but problems. Pro-M unit went in and no further issues. They have many alternatives and set your unit up based on how you have modified your truck.
Here is link to them.
http://www.pro-flow.com/
Photos of throttle body upgrade are in my gallery. More/better photos on my website.
Good Luck.
Here is link to them.
http://www.pro-flow.com/
Photos of throttle body upgrade are in my gallery. More/better photos on my website.
Good Luck.
