ignition system
Thread Starter
|
Freshman User
Joined: Jan 2004
Posts: 25
Likes: 0
From: hbg, pa
ignition system
I am getting ready to build a new 400 for my 1980 F350. Thanks to reading this forum, I will be using an edelbrock 4 bbl intake, edelbrock 600 cfm carb, and comp cams 265 DEH cam. I was wondering what ignition system I should be looking at for this setup.
BTW, it is a 4wd, with an auto tranny. There is a homemade dump bed on it that looks really trick. Consequently, the truck is usually loaded pretty heavy. I also use it to haul my atv to the track, so it gets a decent amount of highway milage.
Thanks for any recomendations and advice.
BTW, it is a 4wd, with an auto tranny. There is a homemade dump bed on it that looks really trick. Consequently, the truck is usually loaded pretty heavy. I also use it to haul my atv to the track, so it gets a decent amount of highway milage.
Thanks for any recomendations and advice.
