heating problems

Reply Subscribe

Thread Tools

Search this Thread

Dec 23, 2003 | 09:35 AM

jimg22

Thread Starter

New User

Joined: Dec 2003

Posts: 6

Likes: 0

heating problems

i just had my expy in the shop for them to replace the high regulator valve for the suspension since it came back my heater doesnt get hot stays cool so i replaced the thermostat same prob still any suggestions

Dec 23, 2003 | 10:35 AM

buzzard

Logistics Pro

Joined: Oct 2000

Posts: 3,960

Likes: 5

From: All over Texas

Maybe a bad/clogged heater core. I'm not exactly sure how the Expy's system works, but on past models, there is a valve in the heater hose that blocks hot water from entering the heater core when the heater is not being used. Maybe this valve is corroded closed, etc.

Dec 23, 2003 | 11:54 AM

jimg22

Thread Starter

New User

Joined: Dec 2003

Posts: 6

Likes: 0

i took it to the dealer thry told me it was an inop blend door actuator or broken bend door anyone have any suggestions on this they told me it would cost $600 to fix most of it was labor

Dec 23, 2003 | 08:07 PM

AwesomeBullet

Senior User

Joined: Dec 2003

Posts: 116

Likes: 1

From: St. Cloud, FL

Since it started doing it AFTER it was worked on, I'd check real close in the area that they were in for loose or broken vacuum lines or electrical connections......

Reply Subscribe

Thread Tools

Search this Thread

Show Printable Version

Email this Page

Reply Share

First
Prev
1 / 1
Next
Last

Forum Jump