8.8" questions
Thread Starter
|
New User
Joined: Dec 2003
Posts: 3
Likes: 0
From: In a Hat
8.8" questions
I've been doing some searching on the site but I still have some 8.8" rear questions for you guys.
What 8.8" came with 31-splines? All the truck years?
Can any 8.8" carrier be swapped with another 8.8" from a vehicle? Specifically looking at Mustang rears.
Can anybody tell me or direct me to a site that tell of the widths for all the 8.8"?
And how well do the refresher kits for trac-lok work? Any opinions or suggestions? (Too poor for Eaton substitute)
Sorry about the onslaught of questions.
Thank in advance.
What 8.8" came with 31-splines? All the truck years?
Can any 8.8" carrier be swapped with another 8.8" from a vehicle? Specifically looking at Mustang rears.
Can anybody tell me or direct me to a site that tell of the widths for all the 8.8"?
And how well do the refresher kits for trac-lok work? Any opinions or suggestions? (Too poor for Eaton substitute)
Sorry about the onslaught of questions.
Thank in advance.
Thread Starter
|
New User
Joined: Dec 2003
Posts: 3
Likes: 0
From: In a Hat
I'm looking at swapping a mustang 8.8" in an older mustang, and I wanted to confirm if I could use a truck carrier because I want the 31-spline axles.
But if I could get a the widths on truck rears I would have to do as much screwing around with swaping carriers etc.
But if I could get a the widths on truck rears I would have to do as much screwing around with swaping carriers etc.
