Outside Mirror Setting Failure
Thread Starter
|
6th Gear
Joined: May 2023
Posts: 6
Likes: 0
Outside Mirror Setting Failure
I have a '03 Expedition Eddie Bauer Edition. 280,000 miles. Excellent overall condition. Every time I start the vehicle, both outside mirrors cycle and end up in some unwanted orientation. I then have to adjust each mirror using the mirror adjustment switch on the driver's door. I have followed the mirror adjustment setting procedure in the owners manual but it does not solve the problem. Ideas? TIA.
Laughing Gas
Joined: Feb 2003
Posts: 877
Likes: 27
From: South Florida
If you have a memory position saved in the key FOB it will reset to that position everytime it's started if you unlocked it with that FOB.
Are you saying you went through the FOB memory set procedure and it's still got a mind of it's own ?
Are you saying you went through the FOB memory set procedure and it's still got a mind of it's own ?
Thread Starter
|
6th Gear
Joined: May 2023
Posts: 6
Likes: 0
The '03 Expedition does not use the FOB to program mirrors and seats. It is all done using controls located on the driver's arm rest.
Fleet Owner
Joined: Apr 2008
Posts: 24,323
Likes: 5,133
From: 0,0,1
That is incorrect about the FOBs. The first FOB to be programmed to the vehicle will use the Memory 1 settings. The second FOB will use the Memory 2 settings. It is in your owner's manual in the Locks and Security chapter.
Thread
Thread Starter
Forum
Replies
Last Post
shocka43
2007 - 2014 Expedition & Navigator
4
Aug 2, 2022 10:41 AM
shov76
1997 - 2006 Expedition & Navigator
6
Dec 12, 2006 07:49 AM
