Throttle cable bracket
Thread Starter
|
Tuned
Joined: Sep 2001
Posts: 279
Likes: 0
From: Western PA
Throttle cable bracket
The prior owner installed a 4bbl with a "riser" plate and welded an extension on the bracket that holds the throttle cable. I had posted before and didnt get an answer about the correct/stcok heoght. So I cut the bracket and made it shorter. the cable seems to be a straight pull from the bracket to the carb but I had to pull the cable housing backward and bolt it down to get the pedal to come off the floor????? I thought the bracket mearny aligned the cable not adjusted it. I had to pull it back perty hard and the little bolt holding the cable to the bracket is under alot of pressure. I am afraid that I will be goin gdown the road and the pedal will just drop o the floor!!!
