12 codes!!
Fleet Mechanic
Joined: Jul 2019
Posts: 1,306
Likes: 310
Has there been recent exhaust or transmission work done?
Off the top of my head, that’s a lot of O2 sensor circuit and transmission codes. The harnesses run close to the exhaust. Could have popped a certain fuse that controls all that. I forget which one, but it has been mentioned (fuse 23?)…
Off the top of my head, that’s a lot of O2 sensor circuit and transmission codes. The harnesses run close to the exhaust. Could have popped a certain fuse that controls all that. I forget which one, but it has been mentioned (fuse 23?)…
Hotshot
Joined: Jan 2004
Posts: 19,760
Likes: 1,079
From: St Louis
Johnny is on the right track. It's a blown fuse (or otherwise open circuit( that powers all those sensors or actuators.
Check fuses F32 & F33 and, if not blown, verify they are both HOT IN START/RUN.
Check fuses F32 & F33 and, if not blown, verify they are both HOT IN START/RUN.
Thread
Thread Starter
Forum
Replies
Last Post
