Accelerator Wiring Plug
Thread Starter
|
7th Gear
Joined: Feb 2022
Posts: 7
Likes: 0
Accelerator Wiring Plug
I'm having a problem that I haven't really found in the forums:
I've got a 2006 F250 2WD w/ the 6.0. There is a plug from the wiring harness that is attached to the accelerator pedal under the dash. It's gray and it has a bunch of thin gauge wires running to it. Recently, I started having issues where the accelerator stopped responding and I found one or two, can't tell yet, of these little wires broken. How do I unhook that plug? I've tried everything I know to do and I can't see it well.
I appreciate any advice!!
I've got a 2006 F250 2WD w/ the 6.0. There is a plug from the wiring harness that is attached to the accelerator pedal under the dash. It's gray and it has a bunch of thin gauge wires running to it. Recently, I started having issues where the accelerator stopped responding and I found one or two, can't tell yet, of these little wires broken. How do I unhook that plug? I've tried everything I know to do and I can't see it well.
I appreciate any advice!!
Thread
Thread Starter
Forum
Replies
Last Post
Bootskillet
1999 - 2016 Super Duty
4
Feb 13, 2006 06:55 PM
