Customer placed camera
Thread Starter
|
4wd Low
Joined: Jan 2020
Posts: 10
Likes: 5
Customer placed camera
Will it be possible to hook a 2nd camera and add it to the camera view screen? Currently I have changed the bumper plug from the useless 4pin to the same as the bed, 7/12 combo. I have the YAW sensor hooked to bed and camera in the bumper. If the 2nd camera would work, wouldn't need the YAW unless I tried the proback assist, lol
Hotshot
Joined: Aug 2006
Posts: 17,400
Likes: 319
From: Whittier, CA
I know I read somewhere that only 1 camera was supported. Can't point you there now, but I know the info was out there. You could do something custom with a relay to switch the camera connector but the truck won't support 2 connections.
I'm not seeing how you connected the 12 pin cable to both your in-bed and the bumper plugs, since the Yaw, TPMS, and camera all connect to the same base harness. Guess you did something custom there.
I'm not seeing how you connected the 12 pin cable to both your in-bed and the bumper plugs, since the Yaw, TPMS, and camera all connect to the same base harness. Guess you did something custom there.
Thread
Thread Starter
Forum
Replies
Last Post
Neo64
1957 - 1960 F100 & Larger F-Series Trucks
13
Sep 23, 2017 07:25 AM
locknload
1980 - 1986 Bullnose F100, F150 & Larger F-Series Trucks
3
Jan 30, 2006 11:10 AM
