6.0 performance build
Thread Starter
|
Cross-Country
Joined: Aug 2022
Posts: 73
Likes: 0
6.0 performance build
Ok so this summer I’m planning on building a 6.0 psd. I’m wanting to do either 225/100 or 205/100 injectors, odogs intake, compound turbos ( non vgt s376 and a t6 s480), regulated return, thumper 2 hpop, sct live wire ts+, and some other supporting mods. How much hp do you think it would hit? Also I know I will have to get a built trans, would it be better to buy a prebuilt trans? Or have a trans built? Also which would be cheaper?
Mountain Pass
Joined: Sep 2019
Posts: 195
Likes: 15
From: British Columbia, Canada
I have 2 good friends with 6.0s.
Both of them run 205/100s with a non VGT kit sporting an S366. Both have all the supporting mods - fass fuel pump, regulated return, built trans etc and they're both dyno'd around 750-800 fuel only.
Both of them run 205/100s with a non VGT kit sporting an S366. Both have all the supporting mods - fass fuel pump, regulated return, built trans etc and they're both dyno'd around 750-800 fuel only.
Thread
Thread Starter
Forum
Replies
Last Post
