Transfer case question
Thread Starter
|
Tuned
Joined: Feb 2023
Posts: 278
Likes: 86
Transfer case question
Hi Guys,
In the near future I need to replace the output shaft seals on my transfer case. Both are slowly leaking. I looked in my Haynes manual today and saw three different transfer cases mentioned. My truck is a 95 F150, 4R70W trans 302 motor XL model. What transfer case would it be?
Haynes mentions a New process 2 speed part time, A Warner 13-45 full time, and a Borg Warner 13-56.
It has the manually shifted case on the floor.
Any help?
In the near future I need to replace the output shaft seals on my transfer case. Both are slowly leaking. I looked in my Haynes manual today and saw three different transfer cases mentioned. My truck is a 95 F150, 4R70W trans 302 motor XL model. What transfer case would it be?
Haynes mentions a New process 2 speed part time, A Warner 13-45 full time, and a Borg Warner 13-56.
It has the manually shifted case on the floor.
Any help?
Laughing Gas
Joined: Feb 2016
Posts: 906
Likes: 119
Read this:
https://www.blueovaltrucks.com/tech-...ransfer-cases/
You "should" have the 1356 but if you don't it should be pretty easy to figure out
https://www.blueovaltrucks.com/tech-...ransfer-cases/
You "should" have the 1356 but if you don't it should be pretty easy to figure out
Hotshot
Joined: Jun 2015
Posts: 12,836
Likes: 2,437
That would have been my guess based off what is in my three trucks. The NP transfer case is definitely not there. I thought the BW 1345 was a part time transfer case.
As stated in post 2, slide under the truck to see what is on the tag.
As stated in post 2, slide under the truck to see what is on the tag.
Thread
Thread Starter
Forum
Replies
Last Post
Woods hunter
1980 - 1986 Bullnose F100, F150 & Larger F-Series Trucks
1
Dec 6, 2023 05:40 PM
Grey89F250
1987 - 1996 F150 & Larger F-Series Trucks
2
Apr 16, 2008 10:31 PM
gui88ford
Clutch, Transmission, Differential, Axle & Transfer Case
2
Sep 23, 2001 08:54 PM
