Wiring schematic
Thread Starter
|
Mountain Pass
Joined: Dec 2023
Posts: 164
Likes: 36
From: Tennessee
Wiring schematic
Does anyone have a diagram for the wiring. I would like to hook up a keyless entry and tie into the wiring within the cab. I have a 92 E-350 ambulance.Factory wiring should be the same. It has power door locks already, single switch on each door.
Thread Starter
|
Mountain Pass
Joined: Dec 2023
Posts: 164
Likes: 36
From: Tennessee
Never mind, ordered an EVTM on ebay. Funny the search function in this forum brings up the same crap every time for me, not related to my query. Go out and google it and it finds the post from this forum easily....odd.
Fleet Mechanic
Joined: Jan 2023
Posts: 1,328
Likes: 448
EVTM is the gold standard. This link may be useful for others that find this post: https://charm.li/Ford%20Truck/
I copied this guy's work on my '97. I got the connectors to make the harness from pick n pull. I connected power slightly different and did not use the same connectors.
I copied this guy's work on my '97. I got the connectors to make the harness from pick n pull. I connected power slightly different and did not use the same connectors.
Thread Starter
|
Mountain Pass
Joined: Dec 2023
Posts: 164
Likes: 36
From: Tennessee
Thanks, that tells me how to get to the connectors and where to mount it. I will figure out the wires myself once I have the book and use wago's most likely. Good info in the video!
Thread Starter
|
Mountain Pass
Joined: Dec 2023
Posts: 164
Likes: 36
From: Tennessee
Between the book, and the video, it was a breeze to hook up, even with the Chinese instructions. I pretty much used my multimeter to get what I wanted. Thanks for all the contributions to make it easy.
Thread
Thread Starter
Forum
Replies
Last Post
