North Country Engine Builder
Thread Starter
|
2nd Gear
Joined: Dec 2023
Posts: 2
Likes: 1
North Country Engine Builder
I have a '95 bronco Eddie Bauer with a 351w with just over 100k on the clock. I'm looking into having it rebuilt, install a new intake, and exhaust, and maybe aftermarket heads. Nothing crazy, but I wouldn't mind a bit more power, and I'm kind of a nerd about efficiency, so knowing how restrictive the stock stuff is bothers me a little.
While I enjoy working on my own stuff, I'm slammed with work and home improvement projects, so I'm looking for an engine builder/machine shop in the north country (I'm in Coos County, NH currently) who specializes in ford stuff. I know there's a pretty strong racing scene around here, so I'm sure there are folks who know these motors inside and out, and figured I'd start here. Let me know if you can recommend anyone in northern NH, VT, or western ME.
I'm also looking for a good alignment shop, as the last guy I took it to seemed like he hadn't seen a TTB in a while.
While I enjoy working on my own stuff, I'm slammed with work and home improvement projects, so I'm looking for an engine builder/machine shop in the north country (I'm in Coos County, NH currently) who specializes in ford stuff. I know there's a pretty strong racing scene around here, so I'm sure there are folks who know these motors inside and out, and figured I'd start here. Let me know if you can recommend anyone in northern NH, VT, or western ME.
I'm also looking for a good alignment shop, as the last guy I took it to seemed like he hadn't seen a TTB in a while.
Thread
Thread Starter
Forum
Replies
Last Post
1andonlywhitie
1948 - 1956 F1, F100 & Larger F-Series Trucks
1
Oct 22, 2012 09:25 PM
KimChee75
Kentucky Chapter
2
May 10, 2007 02:31 PM
