10R140 Front Support
Thread Starter
|
1st Gear
Joined: Aug 2023
Posts: 1
Likes: 0
10R140 Front Support
When disassembling a 10R140 I usually remove main control valve body and the oil pump, then remove the torque converter and front support (B clutch housing, front pump, OWC housing, whatever you want to call it) but has anyone tried removing the front support without removing the pump? Thinking of ways to save time when doing certain procedures
1st Gear
Joined: Jan 2022
Posts: 1
Likes: 0
When disassembling a 10R140 I usually remove main control valve body and the oil pump, then remove the torque converter and front support (B clutch housing, front pump, OWC housing, whatever you want to call it) but has anyone tried removing the front support without removing the pump? Thinking of ways to save time when doing certain procedures
you can pull the pump but not the cherry bomb section. You have to pull the valve body to get the sensors out of the way
Thread
Thread Starter
Forum
Replies
Last Post
evan96F250
1987 - 1996 F150 & Larger F-Series Trucks
1
Sep 15, 2010 01:01 AM
byronchaudoin
Clutch, Transmission, Differential, Axle & Transfer Case
13
Nov 8, 2008 04:42 PM
kcpete
Pre-Power Stroke Diesel (7.3L IDI & 6.9L)
4
May 26, 2004 02:45 PM
