When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
2020 F350 with 7.3 motor / Job 1 / built 2-15-2020 / delivered 2-26-2020
85k ,miles..no signs or slippage. Went to make a U turn and would not go into reverse, wrench symbol lite up. Called my dealer said I was on my way to drop her off. During the drive to the dealer ( 85 miles ) the tranny would not go into 10th gear but drove well in 9th.
Not knowing if this is related, I did notice over the previous months that the truck would feel like it upshifted even though i was already in 10th as indicted by dash
Probably the worst part of this, its been two weeks and the dealer still hasn't dropped the pan to see what's going on. I'm guessing warranty work takes a low priority over big name clients and cash paying,
2020 F350 with 7.3 motor / Job 1 / built 2-15-2020 / delivered 2-26-2020
85k ,miles..no signs or slippage. Went to make a U turn and would not go into reverse, wrench symbol lite up. Called my dealer said I was on my way to drop her off. During the drive to the dealer ( 85 miles ) the tranny would not go into 10th gear but drove well in 9th.
Not knowing if this is related, I did notice over the previous months that the truck would feel like it upshifted even though i was already in 10th as indicted by dash
Probably the worst part of this, its been two weeks and the dealer still hasn't dropped the pan to see what's going on. I'm guessing warranty work takes a low priority over big name clients and cash paying,
Hoping to get a new tranny and not a rebuild
After you get the verdict and fix don't forget to update so some future seacher might have an idea.
I take it you didn't scan for TCM codes to see what it showed?
And, trans tech's are always super busy, I tried a few different dealers looking for one that could get my truck in in less than 6-8 weeks, finally found a small dealer a ways out of town that was only a week behind, and thankfully, they took good care of me and my truck.
I take it you didn't scan for TCM codes to see what it showed?
And, trans tech's are always super busy, I tried a few different dealers looking for one that could get my truck in in less than 6-8 weeks, finally found a small dealer a ways out of town that was only a week behind, and thankfully, they took good care of me and my truck.
No scans performed by me.. Wouldnt know how. Hoping they will open the pan today and see whats inside.
small update: One day short of 3 weeks. they dropped the tranny, to confirm a failure with metal in pan/ My service tech said the good news is he will ensure I get a fresh built tranny and not one sitting in a Ford warehouse. He claims he wants a fresh tranny with all the current updates ( if there is such a thing )
Ive know this advisor ( fleet services ) for many years. The down side is he cant give me a date for the replacement and pladed the order today. so I won't hold my breath....
On a good note and is why I feel he is helping me to an extent. My truck has been in the shop since 6/28 and have been given a loaner vehicle since and for the duration of my repair/ Thats been one lass thing to worry about.
I appreciate the link, Interesting articles. a bit depressing to me as having an OE transmission and getting a new OE with potentially the same problems eventually,
My transmission is a 2020 model job 1, probably built in 2019. I hope Ford has made some type of improvements or upgrades since...key word HOPING.
I appreciate the link, Interesting articles. a bit depressing to me as having an OE transmission and getting a new OE with potentially the same problems eventually,
My transmission is a 2020 model job 1, probably built in 2019. I hope Ford has made some type of improvements or upgrades since...key word HOPING.