Surface rust
Thread Starter
|
Senior User
Joined: Feb 2003
Posts: 213
Likes: 0
Surface rust
The top of my Bronco II has surface rust in the channels of the roof. What can I do to stop it and make it look better? Should I just wire brush it off, primer and paint? Any info would be greatly appreciated.
Elder User
Joined: Sep 2003
Posts: 518
Likes: 0
From: indiana
wire brush may help if the rust is not to bad. the main thing to do is make sure you get all the rust or it will come back and drip rails are the hardest to repair. primer and paint will definetly help after all the rust is gone.
