Glass setting tape ?
FTE Legend
Joined: Jun 2004
Posts: 32,061
Likes: 2,433
From: Upstate NY
I used a little trial and error to get the best width for a strip of cork and when I determined that, I put the cork in and them some RTV and shoved the glass in. there were plenty of witness marks to tell where the glass went in my case. after I had the glass in place, I wiped off the excess RTV.
Thread Starter
|
Tuned
Joined: Jul 2018
Posts: 315
Likes: 55
I used a little trial and error to get the best width for a strip of cork and when I determined that, I put the cork in and them some RTV and shoved the glass in. there were plenty of witness marks to tell where the glass went in my case. after I had the glass in place, I wiped off the excess RTV.
Thread
Thread Starter
Forum
Replies
Last Post
D Sokol
1948 - 1956 F1, F100 & Larger F-Series Trucks
3
Dec 11, 2016 09:38 AM
Aus56
1948 - 1956 F1, F100 & Larger F-Series Trucks
7
Sep 9, 2012 03:38 PM
mikecroskrey
1948 - 1956 F1, F100 & Larger F-Series Trucks
3
Sep 17, 2002 07:46 PM
