reprogramming my alarm
Thread Starter
|
Fleet Mechanic
Joined: Sep 2011
Posts: 1,613
Likes: 106
From: Albuquerque
reprogramming my alarm
I am trying to find info on reprogramming my alarm to tone once for lock and twice for unlock, it currently tone once for lock but nothing for unlock, no lights no tone. Both by explorer and 99 f250 worked this way
I was reading the tech page but found nothing specific
I was reading the tech page but found nothing specific
Thread Starter
|
Fleet Mechanic
Joined: Sep 2011
Posts: 1,613
Likes: 106
From: Albuquerque
i am looking for something like this to make my horn sound when unlocking ( even just parking lights to flash) when unlocking
Deactivating/activating the BeltMinder feature Read steps1-9thoroughly before proceeding with the deactivation/activation programming procedure. The BeltMinder feature can be deactivated/activated by performing the following procedure: Before following the procedure, make sure that: • The parking brake is set. • The gearshift is in P (Park) (automatic transmission) or the neutral position (manual transmission). • The ignition switch is in the OFF position. • All vehicle doors are closed. Seating and Safety Restraints
Deactivating/activating the BeltMinder feature Read steps1-9thoroughly before proceeding with the deactivation/activation programming procedure. The BeltMinder feature can be deactivated/activated by performing the following procedure: Before following the procedure, make sure that: • The parking brake is set. • The gearshift is in P (Park) (automatic transmission) or the neutral position (manual transmission). • The ignition switch is in the OFF position. • All vehicle doors are closed. Seating and Safety Restraints
Thread
Thread Starter
Forum
Replies
Last Post
