92 Exp headlamp assembly
Thread Starter
|
New User
Joined: Feb 2000
Posts: 2
Likes: 0
92 Exp headlamp assembly
Could someone please tell me how to replace the turn signal bulb (on the side)underneath the headlight? Do we have to remove the entire headlamp assembly to do this? If we do, is it as simple as removing the two screws on top of the assembly and pulling the whole shebang out?
Thanks in advance
Deb
Thanks in advance
Deb
Freshman User
Joined: Feb 2000
Posts: 28
Likes: 0
92 Exp headlamp assembly
I once spent almost three hours trying to replace a turn signal bulb in my 90 Ranger. The ultimate solution was to remove those two screws and carefully slide the whole thing out... That way it only took about 5 minutes and caused a lot less damage to my knuckes. Don't force anything, but don't be afraid to push and pull a little. I think that there is a seal around the lights that my cause a slight clearance problem, but you should notice the difference between bumping over the seal and breaking plastic.
Thread
Thread Starter
Forum
Replies
Last Post
1998Ranger25L153CID
1983 - 2012 Ranger & B-Series
1
Jan 30, 2014 07:22 AM
granny_rocket
1994.5 - 1997 7.3L Power Stroke Diesel
4
Mar 9, 2009 06:50 PM
ACE81
1987 - 1996 F150 & Larger F-Series Trucks
4
Aug 3, 2003 04:22 PM
