When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I have a 2001 F250 with a 5.4. I just put a engine with less miles than mine. Mine bit the dust. Can any body tell me what these p lugs are for? Can't find anything to hook them to. Thsnks
The jumper harness in the first picture goes to the CHT sensor. The second plug comes out of the harness on the drivers side at the very front of the valve cover and is about 6 or 8 inches long. It is right next to the CHT wire.
