Front Bumper Hardware Bolt Thread Sizes
Thread Starter
|
Laughing Gas
Joined: Jul 2012
Posts: 856
Likes: 63
From: Los Angeles/Ventura, CA
Front Bumper Hardware Bolt Thread Sizes
I removed the bolts holding the valence and support arms from the front bumper and broke one of the extruded u-clips/nuts.
I measured the bolt sizes and found that they measured M10-1.5, M8-1.25, and M6-1.0.
Can anyone confirm the bolt thread sizes?
I am not talking about the four bolts (2L - 2R) that hold the front bumper to the bumper plate (which I think are M12-1.75).
I measured the bolt sizes and found that they measured M10-1.5, M8-1.25, and M6-1.0.
Can anyone confirm the bolt thread sizes?
I am not talking about the four bolts (2L - 2R) that hold the front bumper to the bumper plate (which I think are M12-1.75).
Banned
Joined: Dec 2018
Posts: 3,541
Likes: 458
Not sure on the size but LMC Truck sells all that stuff so maybe it’s listed there. I’ve been running around with mine off for a couple weeks now and all that hardware was rusted out junk. I’m easily $400-500 into that one including the cost of a good used chrome one from the local parts recycler.
Thread
Thread Starter
Forum
Replies
Last Post
tapenick
1967 - 1972 F-100 & Larger F-Series Trucks
3
Jan 23, 2003 09:58 PM
