Shift trouble
Thread Starter
|
5th Wheeling
Joined: May 2021
Posts: 32
Likes: 0
Shift trouble
Hey folks having some issues and before I drop much more money I need another opinion. 2002 f250 with the 4r100 I know it’s not stock it’s painted blue but it won’t shift in drive it will start in 3rd and stay there. I can row from 1-2-d to go and it doesn’t stall out. It has a new solenoid pack. I’m looking at the harness next, followed by PCM. Am I missing anything /should I go check anything else?
Frmr Ford Trans Engr
Joined: Aug 1999
Posts: 24,725
Likes: 2,651
From: SE Florida
You should read the codes. The best way is to download Forscan free at www.forscan.org. Their page shows how to select and adapter to plug into the OBDII port. Once you have the codes we can help direct where to look. Without the codes, all I can tell you is that something is wrong.
If you don't want to get Forscan, you can take it to a good independent shop or a Ford dealer to read the codes. The places that read codes free CANNOT read Ford transmission codes.
If you don't want to get Forscan, you can take it to a good independent shop or a Ford dealer to read the codes. The places that read codes free CANNOT read Ford transmission codes.
Butt-Head
Joined: Apr 2004
Posts: 9,448
Likes: 2,934
From: Reed Point, MT
Hey folks having some issues and before I drop much more money I need another opinion. 2002 f250 with the 4r100 I know it’s not stock it’s painted blue but it won’t shift in drive it will start in 3rd and stay there. I can row from 1-2-d to go and it doesn’t stall out. It has a new solenoid pack. I’m looking at the harness next, followed by PCM. Am I missing anything /should I go check anything else?
Does it start out in 1st or 2nd if the shift lever is placed in "1" or "2"?
Fleet Mechanic
Joined: Sep 2011
Posts: 1,613
Likes: 106
From: Albuquerque
Thread
Thread Starter
Forum
Replies
Last Post
martyfowler
Clutch, Transmission, Differential, Axle & Transfer Case
1
Feb 4, 2003 02:34 PM
