6.7 p0284 issues
I drove the truck home and it started misfiring about a hour into the drive. I ended up limping the truck home and now that's where the p0284 (contribution/balance cylinder 8) came. On the way home it was only throwing a crank position sensor (p0336, p0315). Now it's only throwing the p0284. I imagine it's a bad injector just wondering what experience people have.
The truck starts and runs, I clear the codes and then it'll misfire after about 30 sec and then keep running. If I put it in drive it'll run but sputter and bog out sometimes. Sometimes itll run but if I come to a stop 50% bogs out.
Info on the truck
eleted dpf and EGRStraight pipe axle dumpH&S mini max tuner (mostly ran in stock by me)8" BDS lift
Any help would be greatly appreciated. I own a 7.3 excursion and this is my first 6.7 so looking for InSite. Thanks in advance.
I have confidence I can do it myself since I did my 7.3



