Jack replacement?
Thread Starter
|
Junior User
Joined: Oct 2019
Posts: 69
Likes: 0
From: Tennessee
Jack replacement?
A little while back I took out my underhood jack and tried to extend it so I could clean it and grease. It was a huge PITA to extend. Has anyone been able to fit a bottle jack in it's place under the hood? The shape of the two seem comparable. I worked my original up and down quite a few times and it does extend, but I dont care for how hard it is to get to full extension without tipping over first, and that it's not entirely stable on flat ground.
FTE Legend
Joined: Nov 2015
Posts: 30,917
Likes: 4,123
From: Angier, NC
Did you try and lube the crap out of it?
Even when new the jacks never stayed up right when you worked them.
I did lube the crap out of mine but it needs to be replaced as it jammed up and will not move any more.
I did place it back under the hood so it looks good LOL
Dave ----
Even when new the jacks never stayed up right when you worked them.
I did lube the crap out of mine but it needs to be replaced as it jammed up and will not move any more.
I did place it back under the hood so it looks good LOL
Dave ----
Cargo Master
Joined: Jan 2019
Posts: 3,369
Likes: 16
From: Caraway, AR
You could get one in the plastic box and bolt the box to the inner fender. Wouldn't exactly look stock though. Might have to make a new bracket to match the bottle jack that bolts in the same place as the stock jack.
Moderator
Joined: Jan 2001
Posts: 56,984
Likes: 2,738
From: Virginia
You are not going to find a bottle jack that is as compact as the stock jack, and extends the same distance as the stock jack. With a bottle jack you are going to find you need a significant block of wood to go along with it to lift the truck up. These trucks are high off the ground, especially a 4x4.
Next time you change the oil, put it in a 5 gallon bucket and sit the jack down in it and leave it for a week. Pull it out into a pan and let it drain and see if that helps it.
Next time you change the oil, put it in a 5 gallon bucket and sit the jack down in it and leave it for a week. Pull it out into a pan and let it drain and see if that helps it.
Lead Driver
Joined: Apr 2002
Posts: 5,319
Likes: 1,244
I keep my jack operational by generous lubing with Fluid-Film. Lube it or lose it. These are great little jacks that work well.
I've even used mine as a house jack. Works perfectly.
I've even used mine as a house jack. Works perfectly.
Trending Topics
Cargo Master
Joined: Jan 2019
Posts: 3,369
Likes: 16
From: Caraway, AR
I didn't have to do anything to mine. It functioned perfectly when I got the truck. Everything else was gone though.
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
10 Things Every Truck Owner NEEDS (2026 Edition)
Michael S. Palmer
Rezvani's Latest Post-Apocalyptic Monster Is a Ford F-150 Raptor Underneath
Verdad Gallardo
Top 10 Most Expensive Ford Trucks Ever Sold on Bring a Trailer
Joe Kucinski
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Top 10 Ford Truck Tragedies
Joe Kucinski
AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make
Brett Foote
Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!
Michael S. Palmer
Ford's 2001 Explorer Sportsman Concept Looks For a New Home
Verdad Gallardo
10 Best Ford Truck Engines We Miss the Most!
Joe Kucinski
Lead Driver
Joined: Apr 2002
Posts: 5,319
Likes: 1,244
Thread
Thread Starter
Forum
Replies
Last Post
GuitarJesus
1987 - 1996 F150 & Larger F-Series Trucks
1
Jun 4, 2012 07:21 AM
