2017 XL reverse trigger wire in dash? help starting install
Thread Starter
|
New User
Joined: Mar 2020
Posts: 1
Likes: 0
2017 XL reverse trigger wire in dash? help starting install
Long story short:
XL with 4" non sync OEM radio removed
Installing kenwood aftermarket double din radio DDX9905S
found 12v accessory wire passenger side kick customer access wiring for above kenwood trigger
installing aftermarket infotainment tailgate camera and running supplied camera/power cable to cab from tailgate
Need to locate reverse trigger wire in dash to input to kenwood harness for sense when truck is in reverse to display tailgate camera video
I would like to power camera from same trigger so that camera is powered on when reverse is activated
I do realize that I can pull the 12v from one of the reverse lamps at tail light but was hoping to get power from cab.
Thanks for any help
XL with 4" non sync OEM radio removed
Installing kenwood aftermarket double din radio DDX9905S
found 12v accessory wire passenger side kick customer access wiring for above kenwood trigger
installing aftermarket infotainment tailgate camera and running supplied camera/power cable to cab from tailgate
Need to locate reverse trigger wire in dash to input to kenwood harness for sense when truck is in reverse to display tailgate camera video
I would like to power camera from same trigger so that camera is powered on when reverse is activated
I do realize that I can pull the 12v from one of the reverse lamps at tail light but was hoping to get power from cab.
Thanks for any help
Thread
Thread Starter
Forum
Replies
Last Post
Firemanjaxfla
2017 - 2022 Super Duty
0
Dec 6, 2019 02:20 PM
pep100
2004 - 2008 F150
3
May 11, 2008 02:42 PM
