Need info quickly re: muffler size
Thread Starter
|
New User
Joined: Aug 2003
Posts: 12
Likes: 0
Need info quickly re: muffler size
I want to replace the muffler on my truck and I have searched this site over for info. Most people talk about getting a Flowmaster 40 series, but no one mentions a part # for it. Also, I am away from my truck so I don't know what the inlet/outlet arrangements are, what length it is, etc. If someone can help me out ASAP I'd appreciate it! I want to get a muffer on my way home to my truck.
Thanks!
Chad
PS - I cross-posted this to the exhaust forum b/c I only have about one more hour!
Thanks!
Chad
PS - I cross-posted this to the exhaust forum b/c I only have about one more hour!
Sit. Stay.
Joined: Oct 2001
Posts: 18,308
Likes: 20
From: Washington State
3" in and out.
Depending on the muffler size you get you can get a center in and out. That is what stock is.
My FM 40 was a center in / offset out. If I remember correctly.
The stock one is HUGE! Almost 2 feet in length. I do not believe that there are any wanted aftermarket mufflers as large as the stock unit.
Get what you like. You'll have to more than likely get a extension pipe welded on.
Let us knwo what you get!
Depending on the muffler size you get you can get a center in and out. That is what stock is.
My FM 40 was a center in / offset out. If I remember correctly.
The stock one is HUGE! Almost 2 feet in length. I do not believe that there are any wanted aftermarket mufflers as large as the stock unit.
Get what you like. You'll have to more than likely get a extension pipe welded on.
Let us knwo what you get!
Thread Starter
|
New User
Joined: Aug 2003
Posts: 12
Likes: 0
Thanks for your help! I actually work for Holley Performance Products, and I'm at our Hooker facility for a little while longer today. The problem is, we don't have any application information for the V10 setup. I am going to use a Hooker Aerochamber, probably the 21506HKR (14" long, center in/out 3"). We have a 22" long one that is offset in, center out but if it's center in/out like you say then I will have to use the shorter one.
Thanks for your help!
Thanks for your help!
