LOL I meant valve stem leaks due to Aluminum rims and steal stems!!!! LOL Should of had more coffee before I posted the reply!!!

 

No problem, but seriously, I don't see any valve stems in the photos. Wonder it they were intentionally omitted for the Marketing photos, as it makes for a "cleaner" look on the rim?
Update: I see the valve stem now, it's at the roughly 3:30 position in the wheel photo in post #1, the third photo from the top.

 

Do they offer a 20x12 ?

are they cast or forged ?

 

Yes they offer them in a 20x12, no they are not forged.

https://www.asantiwheels.com/wheel/1...=2331&sub=7590

First time I've washed the truck since the wheels were put on. Pretty darn happy with the look.

 

I wonder if these wheels could be ordered without the dimpled beadlock bolt heads in the rim lip ?

 

Not sure but I bet a good wheel repair place could make them disappear!

 

AMXDREAMER- thats the 1st wheel Ive ever seen on a SD that I went wow about. Looks amazing.... was all set to get some but a bit disappointed in a lack of offset choices. The rears look fine on how far they stick out but the fronts look like they are out further.... maybe a bit to far for my liking. You have any pics edge on with the tires straight so I can see better exactly how far they stick out?

Are the track widths on these trucks wider in the front than rear?

 

From Ford, the SRW track width is 1.1” wider in front. If you don’t want the tires sticking out too much don’t go more that +12/+18mm offset.

 

Thanks for that a info Nitebreeze. Was definitely thinking to stay on the + side for offset but its definitely limiting my choices in wheels (mostly due to what look I like and not wanting black)