Too Many Bells- Help !!
Thread Starter
|
New User
Joined: Apr 2003
Posts: 7
Likes: 0
From: Raleigh
Too Many Bells- Help !!
I drive my F-250 Crew Cab, 2003 around the job site a lot. I hate the seat belt warning going off every 30 seconds or so. I also hate the doors locking everytime I put the gear shift in drive. If I want to lock the doors I will do it. Can these items be disconnected without a lot of trouble or disconnecting something that should be working? It would be great to hear from someone who is really knowledgeable with the electrical system.
CraigFire
CraigFire
Elder User
Joined: May 2002
Posts: 500
Likes: 0
From: Valley of the Su, Arizona
Also, look in the manual - It explains how to turn off the "auto door lock" feature. As for the seat belt minder bell, there's a plug under the driver seat. I think the wires go to the seat belt receiver - just unplug it. The seat belt reminder light in the dash will still work properly, but the dinging bell will stop...
-superV10
-superV10
Senior User
Joined: Apr 2002
Posts: 377
Likes: 0
From: Cary USA
There have been some who have said unplugging the connector under the seat screws with the air bag operation - don't know if this is true or not.
You can disable the auto minder for the seatbelts by using the process outlined in your manual - or see this post:
https://www.ford-trucks.com/forums/s...threadid=95248
This thread also covers the key in the ignition and the auto lock features....
You can disable the auto minder for the seatbelts by using the process outlined in your manual - or see this post:
https://www.ford-trucks.com/forums/s...threadid=95248
This thread also covers the key in the ignition and the auto lock features....
Thread
Thread Starter
Forum
Replies
Last Post
DYNAMICSPORTS
1999 - 2016 Super Duty
3
Nov 13, 2006 10:39 PM
