67 Bronco Flwheel
Thread Starter
|
3rd Gear
Joined: Aug 2020
Posts: 3
Likes: 0
67 Bronco Flwheel
I have a 67 bronco that has a 302 in it. It came with a 289 six cylinder. I'm changing the clutch and the flywheel is cracked so i wanted to make sure i get the correct one to replace it. The casting number on the flywheel is C5AE6380 F 9L26 which i believe came out of a 1965 Ford Galaxie with 164 teeth 14.25 Inch diameter for a 11 inch clutch. I just wanted to make sure about the 28 oz balance. The engine casting is C8OE -6015A 8K11 for a 1968 302 Windsor small block with 2 bolt mains. Someone told me i didn't need the 28 oz balance but it was in it so i figured i need it. Can someone confirm the correct flywheel for me?
Super Moderator
Joined: Apr 2004
Posts: 34,526
Likes: 2,830
289 was a V8. Same as the 302, just a shorter stroke. 6 and V8 stuff doesn't mix.
Your '68 would be a 28 oz imbalance, same as the 289 V8. '81 is the change to 50 oz.
Easy to find:
https://www.summitracing.com/search/...8-oz-imbalance
More info:
https://www.ford-trucks.com/forums/8...ance-info.html
Your '68 would be a 28 oz imbalance, same as the 289 V8. '81 is the change to 50 oz.
Easy to find:
https://www.summitracing.com/search/...8-oz-imbalance
More info:
https://www.ford-trucks.com/forums/8...ance-info.html
Thread Starter
|
3rd Gear
Joined: Aug 2020
Posts: 3
Likes: 0
67 Bronco Flywheel
Thank you excuse my typo on the six cylinder part. That’s what I thought but I had a friend swear it didn’t matter and it made me wonder. Thanks for the Summit link I’ll get it ordered. I’ll update the thread once I get installed. I have a grand baby that loves riding in it
Thread
Thread Starter
Forum
Replies
Last Post
jim collins
1973 - 1979 F-100 & Larger F-Series Trucks
2
Apr 3, 2013 08:10 AM
