For sale/wanted 48-56 Ford trucks and parts.
#556
My email is tony.cappelletti52@gmail.com
#557
1950 F-1 has flathead and 4 speed non running (locked up) cab has no visible rust and overall rust is very minimal. Does need body work by a good hammer and dolly guy. It is a high serial number 455000+ so the it's one of those end production trucks with the big back window and of course the flat side bed. Truck comes with a clean Tennessee title in my name. It also has 4 new tires, it's originally a North Dakota Truck.
$3500.00 OBO Located in Crossville, TN
$3500.00 OBO Located in Crossville, TN
The following users liked this post:
#559
#560
1954 F350 Express with 9’ dump bed for sale
Letting go of this project, I just don’t have the time to work on it. It’s a 1954 f350 express with 9’ dump bed. It has a 1959 292 y block I was told was running 4-5 years ago.
Included with the truck is a bunch of brand new in box parts (around $4500 in parts)
In open to offers and trades (no projects at this time)
located in Burke county, NC
asking $8500
parts include- 2 rear fenders, 2 side windows, chrome front bumper, headliner, door panels, handles, arm rests, headlights and tail lights, running lights, steering wheel, chrome dash *****, chrome screws and bolts, struts, emblems, wiper blades and arms, wire harness, 12v alternator installed, 0 gauge wiring installed, battery tray, gas cap. And other parts in sure I’m forgetting.
one of the previous owners replaced the radiator, did some brake and exhaust work, got the heat working when they owned it and it was running, ignition coil
also comes with a box of some of the original parts
Included with the truck is a bunch of brand new in box parts (around $4500 in parts)
In open to offers and trades (no projects at this time)
located in Burke county, NC
asking $8500
parts include- 2 rear fenders, 2 side windows, chrome front bumper, headliner, door panels, handles, arm rests, headlights and tail lights, running lights, steering wheel, chrome dash *****, chrome screws and bolts, struts, emblems, wiper blades and arms, wire harness, 12v alternator installed, 0 gauge wiring installed, battery tray, gas cap. And other parts in sure I’m forgetting.
one of the previous owners replaced the radiator, did some brake and exhaust work, got the heat working when they owned it and it was running, ignition coil
also comes with a box of some of the original parts
#563
1956 F100 Small Window Project and Parts
Selling this project for family member whose '56 Big Window I have spent the last 2 1/2 years doing my own personal episode of Overhaulin for: New '56 Big Window Project for long time '65 owner helping friend - Ford Truck Enthusiasts Forums (ford-trucks.com)
I can answer all the details you need that may not already be answered here.
- 1956 ford F100 small window pickup.
Clean Ca. title with pink slip and assigned Yellow & Black 1956 Plates
- This is a project truck NOT a complete truck, NO drivetrain, NO axles, No wheels, No Tires. (the pics with wheels are from when it was not on the frame listed below frame).
- Complete Body with all glass and an extra windshield.
- Sheetmetal in very good condition, floors are great NO rust. Only rust holes are at front of rear fender were the running board meet the fender.
- 2 Tailgates 1 new in box.
- 2 Windshields
- Complete original frame that has been acid dipped and painted.
- Gibbons/Cordoba Independent Front Suspension Kit, NEW.
- Front tilt hood kit. - Various new NOS and reproduction parts still in boxes.
- Multiples of some original parts.
- Several tubs and boxes of new repo and NOS parts.
Asking $10,000 for everything.
Offers welcome just no crazy low ball offers please.
If you are interested, I prefer to make a connection that will allow for phone communication.
Thanks,
Ted
I can answer all the details you need that may not already be answered here.
- 1956 ford F100 small window pickup.
Clean Ca. title with pink slip and assigned Yellow & Black 1956 Plates
- This is a project truck NOT a complete truck, NO drivetrain, NO axles, No wheels, No Tires. (the pics with wheels are from when it was not on the frame listed below frame).
- Complete Body with all glass and an extra windshield.
- Sheetmetal in very good condition, floors are great NO rust. Only rust holes are at front of rear fender were the running board meet the fender.
- 2 Tailgates 1 new in box.
- 2 Windshields
- Complete original frame that has been acid dipped and painted.
- Gibbons/Cordoba Independent Front Suspension Kit, NEW.
- Front tilt hood kit. - Various new NOS and reproduction parts still in boxes.
- Multiples of some original parts.
- Several tubs and boxes of new repo and NOS parts.
Asking $10,000 for everything.
Offers welcome just no crazy low ball offers please.
If you are interested, I prefer to make a connection that will allow for phone communication.
Thanks,
Ted
#564
I tried to post before but I am not sure what happened.
Time for me to let go of my Panel Delivery. The short story is I bought it with the intention to do a full TCI chassis (they make one for it), update to a 351W etc to bring a modern drive to it, but its such a nice survivor that I myself just could not do it. Someone else less sentimental could.
Plus I have other projects going so this was aspirational at best.
I have it on places like Hemmings and FB Marketplace but here is where it would be best to get out there.
Im at $13,500 USD but also up for reasonable offers.
Located in Paso Robles California - Central Coast California (San Luis Obispo County). Truck has been here all its life. I was told I am only the 4th owner.
It was stored in a private collection for decades and why its held up for so long.
There are only a few flaws really
- Brake Lights do not come on, but thats just wires to it. I was able to test the switch itself and it works. I may just tackle this over the weekend
- Turn signals do not fully work. Only the front left. Again, most likely wiring. Almost wonder if the bulb in the front right is still a 6v now that I think of it and was never changed. I will try to get this fixed over the weekend
- Fuel Gauge, Speedometer not hooked up. I put the new Speedo cable in but I dont think I did it right. There is a trick as I understand it.
Brake system (rebuilt m/c, new lines, pads, wheel cylinders) is all new, except the drums themselves (but they were turned as part of the service).
Brand new Powermaster 1 wire alternator installed
Upgraded Aluminum Radiator
Pertronix Electronic Ignition inside original Distributor housing
New Spark Plugs
Engine Oil and Trans Oil recently changed
Here is a video -
Time for me to let go of my Panel Delivery. The short story is I bought it with the intention to do a full TCI chassis (they make one for it), update to a 351W etc to bring a modern drive to it, but its such a nice survivor that I myself just could not do it. Someone else less sentimental could.
Plus I have other projects going so this was aspirational at best.
I have it on places like Hemmings and FB Marketplace but here is where it would be best to get out there.
Im at $13,500 USD but also up for reasonable offers.
Located in Paso Robles California - Central Coast California (San Luis Obispo County). Truck has been here all its life. I was told I am only the 4th owner.
It was stored in a private collection for decades and why its held up for so long.
There are only a few flaws really
- Brake Lights do not come on, but thats just wires to it. I was able to test the switch itself and it works. I may just tackle this over the weekend
- Turn signals do not fully work. Only the front left. Again, most likely wiring. Almost wonder if the bulb in the front right is still a 6v now that I think of it and was never changed. I will try to get this fixed over the weekend
- Fuel Gauge, Speedometer not hooked up. I put the new Speedo cable in but I dont think I did it right. There is a trick as I understand it.
Brake system (rebuilt m/c, new lines, pads, wheel cylinders) is all new, except the drums themselves (but they were turned as part of the service).
Brand new Powermaster 1 wire alternator installed
Upgraded Aluminum Radiator
Pertronix Electronic Ignition inside original Distributor housing
New Spark Plugs
Engine Oil and Trans Oil recently changed
Here is a video -
#566
The following users liked this post:
#567
The following users liked this post:
#568
The following users liked this post:
#569
The following 2 users liked this post by atch:
#570
Thank you. It really is and deserves a home that maybe someone wants to restore to stock. Its off to an incredible start!
The following users liked this post: