When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I am replacing my doors that have power mirrors. My replacement doors have power windows and locks. Is there a pigtail in the newer door for the mirrors or will I need to remove the wiring harness from my old door?
I was just looking at this and I think you have to pull the harness off your old door. Please take some picture as I am adding power mirrors to set of power doors slowly.
Today I did remove the harness on the new door. The boot was pulled off and the wiring was disconnected. I did take pictures of what I did. Inter door space is very cramped with sharp metal edges. Next it time to paint the inside of the door. The only way I know how to show pictures is with email. I have a difficult time trying to download them to FTE forum.
Today I did remove the harness on the new door. The boot was pulled off and the wiring was disconnected. I did take pictures of what I did. Inter door space is very cramped with sharp metal edges. Next it time to paint the inside of the door. The only way I know how to show pictures is with email. I have a difficult time trying to download them to FTE forum.
I know this is slightly old, but, did you find out if the door was prewired for power mirrors or did you have to salvage the harness from your old door?