Do you have a 2017 or 2018 Super Duty with the CHMSL Camera?
#1
Do you have a 2017 or 2018 Super Duty with the CHMSL Camera?
I am working on adding this into my 2017, but I have run into a small road block, and need some help from the members. I need three things if your Forscan savy and can help me out. The four things are;
1. APIM as built
2. IPMB as built
3. BydCM as built
4. Screen shot of your Sync screen while in reverse.
I have now successfully added the Image processor to my truck, and it is recognized in Forscan. I can toggle views via a button, but need to know if a toggle button appears on the screen as well? I have seen a few videos on line but those trucks all have the 360 camera system.
Yes I am aware of thread on the forums started by Sarge for this, I have been posting my progress over there. just need to iron out couple wrinkles to successfully completed this modification.
1. APIM as built
2. IPMB as built
3. BydCM as built
4. Screen shot of your Sync screen while in reverse.
I have now successfully added the Image processor to my truck, and it is recognized in Forscan. I can toggle views via a button, but need to know if a toggle button appears on the screen as well? I have seen a few videos on line but those trucks all have the 360 camera system.
Yes I am aware of thread on the forums started by Sarge for this, I have been posting my progress over there. just need to iron out couple wrinkles to successfully completed this modification.
Thread
Thread Starter
Forum
Replies
Last Post
Monsta
1999 to 2016 Super Duty
36
01-01-2003 08:43 PM
Shepard
Cooling, Heating, Ventilation & A/C
1
06-28-2002 03:22 PM