2011-2016 Super Duty Strobe Light Install
Thread Starter
|
New User
Joined: Apr 2020
Posts: 1
Likes: 0
2011-2016 Super Duty Strobe Light Install
I recently purchased 4 buyers strobe lights model number 8892230.
I am looking to place all 4 in my grill left upper right upper left lower and right lower
I would like the left upper and right lower to be in sync
And the right upper left lower to be in sync.
Can someone explain to me how to wire that up? There is 3 wires on each strobe and I will be running to factory installed aux switch 1.
White- Hot
Black- Ground
Brown- Sync and flash pattern.
Much appreciated!!!
I am looking to place all 4 in my grill left upper right upper left lower and right lower
I would like the left upper and right lower to be in sync
And the right upper left lower to be in sync.
Can someone explain to me how to wire that up? There is 3 wires on each strobe and I will be running to factory installed aux switch 1.
White- Hot
Black- Ground
Brown- Sync and flash pattern.
Much appreciated!!!
Tuned
Joined: Sep 2014
Posts: 282
Likes: 3
To separate them into "groups" for different/alternating patterns, I'm pretty sure you needed to purchase strobes with 4 wires. As it stands right now you could program a different pattern to each and they would all flash randomly. Another choice might be to wire the lights in sets of 2 (diagonally) and run 2 separate power switches. This would let the exact time the sets were getting power vary a little giving the illusion of alternating pairs. But, don't be surprised if they occasionally all flash together then seperate again.
Thread
Thread Starter
Forum
Replies
Last Post
Hunter6146
Audio & Video Systems, Navigation, Satellite Radio & Mobile Electronics
0
Jan 8, 2019 02:38 AM
