Wheel help
Thread Starter
|
New User
Joined: Apr 2020
Posts: 7
Likes: 0
Wheel help
Looking to replace the Stock Tremor rims on my truck. Im torn between +18 or 0 offset 18x9. Im looking for a basically flush to very little poke set up. I have only ever had -18 rims but im done with that set up and want to avoid mud flaps and sending rocks up the side of my truck since Im on dirt roads often. Anyone have images of either set up would be great or even any input. I don't want to regret my decision. For now I will keep the Wranglers on the truck until they wear and then replace with a 35x12.5x18. Thanks for any help!
Senior User
Joined: Sep 2019
Posts: 372
Likes: 5
Input your current setup with the setups you're looking at on this site. It will tell you exactly how much further out it will stick. Then you can measure your current setup and add said inches. https://tiresize.com/wheel-offset-calculator/
The Tremor does have those OEM flares so you could get away with a little more than someone without them.
The Tremor does have those OEM flares so you could get away with a little more than someone without them.
Thread
Thread Starter
Forum
Replies
Last Post
NorEasterMA
1999 - 2016 Super Duty
3
Nov 18, 2013 11:31 AM
RawPower
Brakes, Steering, Suspension, Tires, & Wheels
3
Jan 23, 2005 04:07 PM
