Egr????
Thread Starter
|
Senior User
Joined: May 2003
Posts: 123
Likes: 0
From: Philadelphia
Egr????
Whats up yall? Got the codes pulled the other day and suprisingly I only had 1 code in there. It told me the "EGR flow was insufficient". I am sure this is probably caused by a number of different things. Where do I start? Is this caused by a clogged cat? Is there a broken line? Is the EGR just gummed up? Any suggestions would be greatly appreciated.
Elder User
Joined: Mar 2003
Posts: 522
Likes: 0
From: Warren, MI
I would say unplug it 1st, pull off the whole assembly, and then pull off the EGR senson and make sure it is all clean.
There is a large spring and i could see if it wasnt cleaned ever 60000 or so it, along with the sensor would get all clogged up.
Adam
There is a large spring and i could see if it wasnt cleaned ever 60000 or so it, along with the sensor would get all clogged up.
Adam
Thread
Thread Starter
Forum
Replies
Last Post
bebad96
Ford Inline Six, 200, 250, 4.9L / 300
19
Sep 24, 2004 11:36 PM
MetallicaFan39
Small Block V8 (221, 260, 289, 5.0/302, 5.8/351W)
2
Jun 1, 2004 08:47 PM
