02 Expl abs issue
Thread Starter
|
New User
Joined: Mar 2020
Posts: 2
Likes: 0
02 Expl abs issue
HI all, Have a issue with my 2002 explorer. Just redone all wheel bearings, brakes, and the 1155 code keeps popping up, Now the left frt wheel bearing is new [ Timken, USA made with a brand new abs sensor, So why does the code keep popping up?? Reset/ Cleared 2/3 times, and its back. Any Ideas??
Logistics Pro
Joined: Jun 2009
Posts: 4,817
Likes: 83
From: Cedar Rapids, IA
There's more to the LF wheel speed sensor circuit than just the sensor. I assume you're referring to a C1155 diagnostic code. The issue could also be with the wiring between the sensor and the ABS computer. It's also possible (albeit unlikely) that the new sensor is bad. You'll want to carefully inspect the wiring from the sensor to the ABS module. Does your scan tool allow you to monitor the ABS system datastream? If so, is that sensor reporting a reasonable speed compared with the other wheel speed sensors?
-Rod
-Rod
Thread
Thread Starter
Forum
Replies
Last Post
kjester
Explorer, Sport Trac, Mountaineer & Aviator
15
Mar 17, 2011 02:31 PM
