64 f100 dash
Thread Starter
|
Mountain Pass
Joined: Oct 2016
Posts: 194
Likes: 0
64 f100 dash
what do u guys-girls use for the color lenses for the high beam light , and the turn signal lights ?
I have put a stand alone ground on the back of the light holder plate and it made the lights work to good
thanks mike
I have put a stand alone ground on the back of the light holder plate and it made the lights work to good
thanks mike
More Turbo
Joined: Mar 2019
Posts: 541
Likes: 37
From: Tulsa, OK
I did the same on my 65. I went to wal-mart and bought a 6 pack of the plastic colored dividers that go in a three ring binder. There are 6 different colors in there including the blue and green that I needed. I cut out some small squares and used packing tape to adhere them to the metal bezel. It took four layers to get them right so the signal did't wash them out, but I now have green turn signals and a blue bright indicator and I'm not blinded by either one. I can get pics later this evening for you if you'd like.
Thread
Thread Starter
Forum
Replies
Last Post
Stormcloud
1961 - 1966 F-100 & Larger F-Series Trucks
2
Aug 12, 2011 12:16 PM
Rick X
Electrical Systems/Wiring
2
Oct 11, 2003 09:26 PM
