TP sensors compatibility
TP sensors compatibility
Tuned
Joined: Feb 2009
Posts: 295
Likes: 9
From: New Lisbon NJ USA
2006-2009 are banded mount sensors on the rim and 2010 up are valve stem mounted so there is that difference, as for actual compatibility I can't tell you, I know when I put 2018 wheels on my 2011 the TPSM's were different and I had to change them so I am guessing that the frequency of the signal is probably different.
Even if they were compatible the battery on the sensors is 12 years old so they are most likely to fault anyway.
Even if they were compatible the battery on the sensors is 12 years old so they are most likely to fault anyway.
5th Wheeling
Joined: May 2019
Posts: 32
Likes: 0
From: Washington LA
I have used a valve stem mount sensor on a truck that had a rim mounted sensor from factory. But it was a new sensor and it is a dual frequency sensor from Autel that i am able to program with a TPMS tool from Autel. Even if the frequency is the same the ID has to be programmed also. That would have to be done with a proper diagnostic tool.
Thread
Thread Starter
Forum
Replies
Last Post
Steve Ducker
Explorer, Sport Trac, Mountaineer & Aviator
12
May 5, 2008 10:42 AM
Rubicante
1980 - 1986 Bullnose F100, F150 & Larger F-Series Trucks
10
Apr 20, 2000 08:52 PM
