Programming the fob 2003 Ford Escape
Junior User
Joined: Jun 2004
Posts: 67
Likes: 0
From: Alberta
You will need a working transponder key to begin with....
- Turn ignition from OFF to RUN 8 times within 10 seconds, with the 8th time ending in
RUN. Door locks will cycle to confirm programming mode. - Within 20 seconds press any button on first keyless remote. Door locks will cycle
to confirm programming. - Within 20 seconds, press any button on second keyless remote or your existing remote. Door locks will
cycle again to confirm programming. - Turn ignition to OFF. Locks will again cycle to indicate end of programming mode.
- Remote should now be programmed.
- Good Luck
Thread
Thread Starter
Forum
Replies
Last Post
