460 Knock
Thread Starter
|
Tuned
Joined: Jun 2016
Posts: 255
Likes: 6
From: 94' F-250 460 4x4 e4od
460 Knock
Qas on here a while back writing about my low oil pressure on a, 94 F-250 460. Ran it for a while with 15w-50 oil but it knocked at high RPM so rather than throw a rod, I just put new main and rod bearings in. I put assembly lube on everything, torqued all the caps to spec and primed the oil pump. And this is the result,
. Any advice? I'm pretty done with this thing now.
Logistics Pro
Joined: Mar 2005
Posts: 4,698
Likes: 47
From: Mexico, Missouri
Video wasn't really long enough to get a general idea on direction of the noise...
But it sounded like exhaust or lifter collapsed.
Is it louder top of engine, bottom of engine, or near the exhaust manifolds?
But it sounded like exhaust or lifter collapsed.
Is it louder top of engine, bottom of engine, or near the exhaust manifolds?
Thread Starter
|
Tuned
Joined: Jun 2016
Posts: 255
Likes: 6
From: 94' F-250 460 4x4 e4od
It's definetely rod or main bearings, I just didn't want to believe it yesterday. I can hear it clunk in the pan when I turn off the ignition. Looks like I'll tear her down one more time
Thread
Thread Starter
Forum
Replies
Last Post
rjbuningsr
1973 - 1979 F-100 & Larger F-Series Trucks
0
Jul 2, 2017 02:57 PM
nbfnwe
1980 - 1986 Bullnose F100, F150 & Larger F-Series Trucks
3
Sep 18, 2007 03:24 PM
stm250
Big Block V8 - 385 Series (6.1/370, 7.0/429, 7.5/460)
8
Aug 8, 2007 01:42 AM
masterbeavis
Big Block V8 - 385 Series (6.1/370, 7.0/429, 7.5/460)
3
Dec 13, 2002 08:34 PM
proud owner
Big Block V8 - 385 Series (6.1/370, 7.0/429, 7.5/460)
12
Jul 20, 2001 08:59 PM
